Changing kitchen cabinet hinges is a way to update your kitchen without having to go all the fuss and expense of refinishing furniture or installing new ones. Measure the distance between the screw holes cabinet handle to determine the necessary distance between the holes in the door of the kitchen cabinet. Cut a piece of masking tape longer than the distance measured between the screw holes. Stick it inside the closet door where you want the handle. Repeat on the outside of the cabinet door so that the two pieces of tape mirror each other.
12 Picture Gallery: How to Install Kitchen Cabinet Hinges
Keep the level of painter’s tape on the inside of the cabinet door and mark the position of the screw holes on the tape using the measurement noted above.Make a hole at each mark, sized to fit the screws that come with the kitchen cabinet hinges, right through to the other side of the door. Slide the crests of the cabinet (padding, if equipped with handles) on the ends of the screws; protecting the closet door being marked by the handle. Place the handle so that each tip screw goes in the screw holes in the kitchen cabinet hinges. Hold the handle flat against the closet door while tightening the screws with the screwdriver.
When moisture enters a room, the wood cabinet doors have a tendency to expand and contract. Kitchen cabinet hinges most concealed consist of a hinge and respective clamping plate. The fixing plate is attached to the cabinet and the hinge snaps onto it. Open the cabinet door and locate the kitchen cabinet hinges attached to the door and cabinet box. Remove any object near the hinge that may interfere with the setting, and you should be able to insert a screwdriver into the hinge. Turn the adjustment screw on the back of the kitchen cabinet hinges to pull the door inward or outward cabinet.
Adjusts the door left to right alignment turning the screw located in the long axis of the hinge. This setting will allow the doors couples look when closed. Turn the screw clockwise, push the door hinge farther horizontally, while turning the screw counterclockwise will pull the door closer hinge. Adjust the vertical movement of the door with screw adjustment cam plate fixation. Locate the screw into the hole with a square shape in the long axis of the hinge. Turn the screw clockwise to move the door up. Turn the screw counterclockwise to move the door down. Close the cabinet doors.
This post topic: Kitchen Ideas