Kitchen cabinet doors – With all the choices available in kitchen cabinets, finding the right doors can be a daunting task. However, if you build your own, then you are sure to get what you like. Plywood overlay doors are among the easiest to build, require gluing and clamping pieces together. Simply cut a piece of wood large enough to cover the opening of the door. Apply veneer edge banding to edges overlap and add hinges and you’re ready to go.
12 Picture Gallery: How to Build Kitchen Cabinet Doors
To build kitchen cabinet doors are Measure the width and height of door openings and add 1-inch to both measurements. Set near the table saw to the extent that it represents the gates of the wall cabinets. In our example, it would be 28 1/2 inches. Always cut the doors highest first. Add the total width of all doors in the wall cabinets to determine how many blocks you need. If there are three doors 15 inches wide and four doors 11 1/2 inches wide, it is necessary to cut two blocks up from the gates of the wall cabinets.
Cover the edges of the kitchen cabinet doors of plywood with edge banding veneer. This product is very thin and easily cut with a knife. It glues the edges of the wood when heat is applied with an iron. Run a block of wood on the side edge to force the hot adhesive into the pores of the plywood.
This post topic: Kitchen Cabinet